FEED TWITTER

Cobalt Engineering

vancouver_decorative_concrete
vancouver_decorative_concrete
vancouver_decorative_concrete

Jan 10, 2011 / Gallery

Private Residence

wr-article
CLICK HERE TO READ WRITE UP IN BC HOME MAGAZINE JUL/AUG 2011 System One Floor Solutions Inc. worked closely with KBW Construction to ensure the homeowners dream of decorative concrete over radiant concrete floors could be achieved. The science behind radiant floor heating is quite simple: Tubes that circulate hot water or electrical heating elements are installed in the concrete slab when it’s poured, turning the thermal mass of the concrete into an inconspicuous radiator of warm, even heat. Among the many benefits: You’re feet are always toasty warm, the temperature is consistent and easy to control, you won’t feel the drafts or hear the noise of blowing air, and no dust or allergens get circulated within your home through air vents. Best of all, you’ll typically pay lower utility costs than with a forced-air system, because concrete floor radiant heating consumes less energy to achieve the same level of comfort.
solution-1


Products Used: Ardex EP2000 [View Spec], Ardex K15 [View Spec] at 3/8” and then applied Ardex SDM Grey [View Spec]. Learn more about our concrete remediation services

Apr 7, 2010 / Gallery

Private Residense

private-residence-1-article

Private Residence – 6000 sq feet

Kindred Construction – Vancouver – System One Floor Solutions was brought in on this project at the design stage. The home owner wanted a custom seamless decorative concrete floor.

Materials – Ardex EP2000 Crack Suppression System [View Specs] , Ardex SDT Engineered Cement, Ardex SDM micro topping [View Specs] with custom mixed water based stains.

private-residence-2-article

Dec 23, 2009 / Gallery

TAXI Vancouver

taxi-2-article

TAXI Vancouver – 5500 sq ft

Pax Construction – System One Floors Solutions was contacted to offer a LEEDS friendly solution to this heritage building existing concrete surface. The owner did not want the elevation of the existing concrete floor to change. System One applied an engineered micro topping to emboss the existing concrete floor and applied custom stains and sealed. The owner wanted the look of an old worn out floor to suit the environment of their newly renovated office.

Materials – Ardex SDF [View Specs] patching material and Ardex SDM [View Specs] micro topping and custom stains.

taxi-1-article

Dec 14, 2009 / Gallery

Luis Building

luis-1-article

Luis Building 1321 Richards – Vanmar Contractors

Originally an exposed concrete topping was poured in place that was not up to the owners standards.
System One Floor Solutions met on site to review Vanmar’s client concern(s) about the finish. System One Floor Solutions Inc. was able to install a cementitious micro topping that solved both the visual aesthetic and Vanmar’s concern about raising the current floor elevation.

Materials – Ardex SDM [View Specs] micro topping and Ardex Concrete Guard Sealer[View Specs]

luis-2-article

Dec 14, 2009 / Gallery

 Page 1 of 2  1  2 »