604.542.2274

OverLayments

09 Aug OverLayments

Posted at 22:06h in Systems by

 

Cementious Overlayments

 

Allow you the freedom to create the right flooring for that one-of-a-kind look…from natural cement gray to brilliant integral colors, luxurious inlays and creative topical stain designs. Is the right choice when design flexibility, low maintenance and high durability are a must! Not to mention a concrete slab that might not be up to par and requires a fresh look.

 

There are many options when it comes to overlayments and some of our go to products include:

 

ARDEX SD-T®

?Self-Drying, Self-Leveling Concrete Topping ?????

 

?ARDEX SD-T® is a self-drying, self-leveling, no troweling topping for fast track resurfacing, smoothing or leveling of indoor concrete. ARDEX SD-T® hardens fast due to its unique self-drying formulation – it can be sealed in as little as 2 hours depending on the sealer type, and opened to traffic as soon as the sealer has fully dried. Use ARDEX SD-T to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing. ARDEX SD-T® can also be installed in areas such as retail stores, television studios and all interiors requiring such a surface.

 

View Product Sheet

 

  • Portland cement-based
  • Smooth new or existing concrete and certain non-porous surfaces
  • Install from 1/4” up to 2” neat, and up to 5” with aggregate
  • Walk on and seal in as little as 2 hours
  • For commercial, light industrial and residential applications
  • Especially suited for ARDEX DESIGNER FLOORS™
  • Available in white and gray
  • Available in 50 lb packaging

 

Technical Data Reference

http://www.ardexamericas.com/en-us/Documents/TechData_En_SDT.pdf

 

Material Safety Data Sheets

http://www.ardexamericas.com/en-us/Documents/MSDS_En_SDTGray.pdf

http://www.ardexamericas.com/en-us/Documents/MSDS_En_SDTWhite.pdf

 

lululemon-robson-1

ARDEX PC-T™

Polished Concrete Topping????????????????????

 

Self-leveling topping base for floors that will receive a polished concrete surface. Designed for use with ARDEX Polished Concrete Systems. Use with ARDEX PC COLOR-DYETM for decorative finishes.

Install over the surface of existing concrete to produce a new wear layer.

 

Key Features

 

  • Self-drying
  • Portland cement-based
  • Interior use
  • Pourable and pumpable
  • Available in light gray, gray, and white

 

Installation

 

  • General priming recommendations: EP 2000TM Substrate Preparation Epoxy Primer with sand broadcast;
  • See the ARDEX EP 2000TM technical brochure
  • Packaging: 50 lb (23 kg)
  • Coverage: 16.7 sq. ft. per bag at 3/8” (1.6 m2 at 9.5 mm)
  • Thickness:
    • Neat: 3/8” to 2” (9 mm to 5 cm)
    • Aggregate: up to 5” (13 cm)
  • Flow time: 10 minutes
  • Walkable: 2 to 3 hours
  • Polish: 24 to 72 hours

 

Performance

 

  • ASTM C191 Initial Set: Approx. 10 minutes
  • ASTM C191 Final Set: Approx. 45 minutes
  • ASTM 109 mod (air cure only) Compressive Strength: 6100 psi (427 kg/cm2) at 28 days
  • ASTM C348 Flexural Strength: 1200 psi (84 kg/cm2) at 28 days
  • VOC: 0

 

Technical Data Reference

http://www.ardexamericas.com/en-us/Documents/TechData_En_PCT.pdf

 

Material Safety Data Sheets

http://www.ardexamericas.com/en-us/Documents/MSDS_EN_PCTGray.pdf

http://www.ardexamericas.com/en-us/Documents/MSDS_EN_PCTWhite.pdf

 

Specifications
http://www.ardexamericas.com/en-us/Documents/ARDEX%20PC-T_CSI%20FORMATTED%20SEC%2003%2035%2053.pdf

 

Product Videos

Watch Video Here

 

private-residence-1-article