Decorative Concrete

SYSTEM

DECORATIVE CONCRETE

CEMENTIOUS OVERLAYMENTS

Allow you the freedom to create the right flooring for that one-of-a-kind look…from natural cement gray to brilliant integral colors, luxurious inlays and creative topical stain designs. Is the right choice when design flexibility, low maintenance and high durability are a must! Not to mention a concrete slab that might not be up to par and requires a fresh look.

There are many options when it comes to overlayments and some of our go to products include:

ARDEX SD-T® SELF-DRYING, SELF-LEVELING CONCRETE TOPPING

ARDEX SD-T® is a self-drying, self-leveling, no troweling topping for fast track resurfacing, smoothing or leveling of indoor concrete. ARDEX SD-T® hardens fast due to its unique self-drying formulation – it can be sealed in as little as 2 hours depending on the sealer type, and opened to traffic as soon as the sealer has fully dried. Use ARDEX SD-T to provide a hard, flat, smooth surface for warehouses, utility rooms and light manufacturing. ARDEX SD-T® can also be installed in areas such as retail stores, television studios and all interiors requiring such a surface.

VIEW PRODUCT SHEET

Portland cement-based
Smooth new or existing concrete and certain non-porous surfaces
Install from 1/4” up to 2” neat, and up to 5” with aggregate
Walk on and seal in as little as 2 hours
For commercial, light industrial and residential applications
Especially suited for ARDEX DESIGNER FLOORS™
Available in white and gray
Available in 50 lb packaging

TECHNICAL DATA REFERENCE

http://www.ardexamericas.com/en-us/Documents/TechData_En_SDT.pdf

MATERIAL SAFETY DATA SHEETS

http://www.ardexamericas.com/en-us/Documents/MSDS_En_SDTGray.pdf

http://www.ardexamericas.com/en-us/Documents/MSDS_En_SDTWhite.pdf

ARDEX PC-T™ POLISHED CONCRETE TOPPING

Self-leveling topping base for floors that will receive a polished concrete surface. Designed for use with ARDEX Polished Concrete Systems. Use with ARDEX PC COLOR-DYETM for decorative finishes.

Install over the surface of existing concrete to produce a new wear layer.

KEY FEATURES

Self-drying
Portland cement-based
Interior use
Pourable and pumpable
Available in light gray, gray, and white

INSTALLATION

General priming recommendations: EP 2000TM Substrate Preparation Epoxy Primer with sand broadcast;
See the ARDEX EP 2000TM technical brochure
Packaging: 50 lb (23 kg)
Coverage: 16.7 sq. ft. per bag at 3/8” (1.6 m2 at 9.5 mm)
Thickness:
- Neat: 3/8” to 2” (9 mm to 5 cm)
- Aggregate: up to 5” (13 cm)
Flow time: 10 minutes
Walkable: 2 to 3 hours
Polish: 24 to 72 hours

PERFORMANCE

ASTM C191 Initial Set: Approx. 10 minutes
ASTM C191 Final Set: Approx. 45 minutes
ASTM 109 mod (air cure only) Compressive Strength: 6100 psi (427 kg/cm2) at 28 days
ASTM C348 Flexural Strength: 1200 psi (84 kg/cm2) at 28 days
VOC: 0